SulfurAce mechanical seal for sulfur transfer pump

In a chemical plant in Japan, a pump is used to transport molten sulfur. Crystallized sulfur in the area of the shaft seal led to contamination and enormous maintenance costs. Since retrofitting to the EagleBurgmann SulfurAce mechanical seal with an integrated QS300 quench seal, the pump offers optimal availability. The working environment is clean and employees are secure from hazardous substances.

Read on for the entire case study...

Magnetic coupling seals ammonia and propane

The high-efficiency NMB-16P-2R-45-SC magnetic coupling as a hermetic seal in a vertical pump. The process medium – a mixture of ammonia and propane – has very poor lubricating properties. The low temperature (-45 °C (-49 °F)) plays a decisive role in the choice of materials.

Shaft seals in ammonia production

During the production of ammonia, carbon dioxide is removed from the process with Benfield solution – an aqueous potassium carbonate solution with diethanolamine. HJS1 type mechanical seals have proven to be best for sealing the pumps in this area.

Typical operating conditions: p = 2 … 4 bar (29 ... 58 PSI), t = 100 … 150 °C (212 ... 302 °F), n = 1,500 min^-1.

Compressor seal in fertilizer production

A DGS11.1 seals a compressor in the fertilizer production facility at Incitec Pivot Limited in Australia. In addition, Espey WD400 nitrogen-buffered carbon floating ring seals are used to seal the bearings. The process medium is a mixture of hydrogen and nitrogen. The seal is designed for frequent slow roll operation when starting and stopping the machine.

Expansion joints in anhydrite processing

Expansion joints are applied in the processing of anhydrite at GBC Gulf Bayport Chemicals LP in Pasadena, TX, USA.

Operating conditions: p = 3.1 bar (45 PSI), t = 260 °C (500 °F).

Expansion joints in chemicals production

The Columbian Chemicals production facilities in Centerville, LA, USA have a number of expansion joints installed in the exhaust gas system.

Operating conditions: p = 0.35 bar (5 PSI), t = 760 °C (1,400 °F).